1psi = 0.068948 bar = 0.070307 Kg/cm2 = 6.8948 kpa = 0.0068948Mpa
Use a high temperature anti-seize compound to make it easier to remove the transducer
Soon we will continue our services at our new address.
The best location to mount your Melt Pressure Transducer is when the polymer is in a good melted state and the ...
MPS Melt Pressure is the hardest for engineers, plastic melt pressure sensors and instrumentation ...
Extreme care must be taken when setting the melt pressure controller on an extruder, otherwise damage to the extruder may occur.
Melt Pressure Sensor Diaphragm Damaged by a Sharp Edge
Almost all extruders use at least one melt pressure transducer, because melt pressure ...
Melt pressure transducer and transmitter cables are used to connect a pressure gauge to a display gauge or PLC.
Available melt pressure sensor accessories include
MPS Melt Pressure Sensors are compatible with all common brands on the market
The Melt Pressure Sensor is connected to a signal output whose value can be observed by an operator or instrumentation.
For more than 60 years, MPS Melt Pressure Sensors have been used in various applications around the world.
The Melt Pressure Sensor Transducer should be removed while the chamber is hot and wiped with a non-abrasive cloth.
Used to monitor possible contamination and to alert the operator, which can clog the filter and cause an increase in pressure in the mold.
The main market for melt pressure transducers is that plastic or rubber materials are melted and processed at high temperatures
Melt pressure transducer, In processes where plastic raw materials can reach high temperatures ...
Melt pressure sensors; plastic rubber and food etc. pressure and temperature of hot fluids in sectors
Transducers can be placed inside the barrel, before a sieve changer, before and after a melt pressure sensor pump, or inside the mold.
We have renewed our website to serve you better
What You Need to Know About the Melt Pressure Transducer Used in Extruders ..
Mount Melt Pressure Transducers Correctly
Melt Pressure Sensor, Keep mounting holes clean